Length is the smallest of the three things that decide it. A 100-foot run is priced from what the trench has to be dug through, how deep it has to go to keep fall the whole way, and where the water is allowed to end up. The same 100 feet is two different jobs on two streets.

What 100 feet costs to dig here

One figure dominates a hundred-foot price in Syracuse: the shallowest mapped seasonal water table sits 3.1 inches down, and up to 100% of the mapped ground is rated as susceptible to ponding. A trench of any length cut in spring here is a trench working below the water line. That means dewatering, a slower day, and spoil that comes out saturated and will not go back. Get the quote for the season the work will actually happen in, because a hundred feet in August and a hundred feet in April are not the same job on this ground.

The reasoning behind that

A per-foot figure is the part of the quote that varies least. Digging 100 feet through sandy loam with a trencher and digging 100 feet through wet clay with a mini excavator are the same line on an estimate and not remotely the same day of work.

Depth compounds it. A drain has to fall the whole way, so a long run finishes deeper than it starts. Add fall over 100 feet and the far end can be a foot deeper than the near end, which changes the spoil, the shoring and sometimes the machine.

Then there is the end of the pipe. A run that daylights on a slope costs what the trench costs. A run that has to reach a dry well, a sump, or a permitted connection has a second job priced into it, and that second job is frequently larger than the first.

Ask for the quote broken into those three. A single per-foot number tells you nothing you can compare against another firm’s single per-foot number.

More on this: French Drain Installation Cost in Syracuse, UT.

Every question, in one place: Syracuse Utah French Drain drainage questions.

Check the Syracuse Utah French Drain service area to see whether your street is covered.

Back to Syracuse Utah French Drain.